Deleting All Stored Stations
It is possible to simultaneously delete all stored stations from the memory,
including ETM, but excluding the favorite station.
1) Turn the device off.
2) Press and hold the [ ] (DELETE) button untill “dEL” and “ALL” flash on
the display.
3) Quick press the [ POWER ] button to confirm and delete all stored stations.
4) “dEL” is shown on the display. Once the display returns to showing the
clock time, all stored frequencies have been deleted.
Note: If the [ POWER ] button is not pressed for confirmation within 3 seconds,
the delete function is exited automatically.
ENHANCED TUNING MODE (ETM+): AN INTRODUCTION
ETM+ allows you to auto tune and store FM, LW, MW and SW stations into
the ETM memory. Unlike ATS (Auto Tuning Storage), scanned stations will
not be stored into the regular memory (VM). In this way, when you are in a
different city or country, you can use the ETM+ function to auto search new
stations without overwriting any previously stored stations within the memory.
ETM+ can also be used for listening to LW, MW and SW stations more
conveniently. Because signals in these frequency bands may only be
available during a specific time of day, you can use this feature to make
time-specific ETM memories.
12
To Next Page
Loading...
Need help?
General
