16
Other Settings and Features
AM Bandwidth Selection
Quick press [ ] (AM BW) repeatedly to select a bandwidth that enhances
the intelligibility of longwave, medium wave (AM) and shortwave signals.
Selectable bandwidths are 2.5, 3.5, 5.0 and 9.0kHz.
Wider bandwidth: Has better audio fidelity when receiving strong signals or
local stations.
Narrower bandwidth: Limits interference from adjacent strong signals and
background noise, thereby especially suitable for receiving weak and
distant stations.
FM Stereo/Mono Selection
When listening to FM through headphones, quick press [ FM/ST. ]. If the
device detects that the FM signal is in stereo the display shows the stereo
“ ” icon. Quick press [ FM/ST. ] again to return to mono listening.
Tip: When the FM signal is broadcasted in mono, or broadcasted in stereo but
the signal received is weak, the audio output is in mono and “ ” is
not displayed.
Auto Sorting Memory
This device can automatically organize all stored stations. In power off mode,
press and hold the [ ] (0) button until the station memory preset indicator
on the display starts running. This feature deletes duplicate stations and sorts
the sequence of stored stations from low to high frequency.
FM De-emphasis Time Constant
While receiving FM broadcasts, long press [ 4 ] to adjust the de-emphasis
setting to 50μs or 75μs.
“ ” : For Europe, Australia, Japan (and most other locations).
“ “ : For the Americas and South Korea.
To Next Page
Loading...
Need help?
General
