Tecsun PL-398MP - SNOOZE FUNCTION; HOW TO CHANGE THE DISPLAY MODE; KEY-LOCK FUNCTION

19
PL-398MP
SNOOZE FUNCTION
When the preset alarm is activated, you can press the
[LIGHT / SNOOZE] to temporarily turn off the alarm, the
unit will start alarming again 5 minutes later.
With radio OFF: Repeat pressing
the [DISPLAY] button to view
temperature or alarm time display.
With radio ON: Repeat pressing the
[DISPLAY] button to view local time,
alarm time, temperature or signal
strength showing on the upper right
corner of the display.
HOW TO CHANGE THE DISPLAY MODE
Press
Press & hold the [ ] button until “ ” symbol appears
on the display to activate the key lock function.
Press & hold it again until “ ” symbol disappears to
deactivate the locking function.
KEY-LOCK FUNCTION