21
PL-398MP
FM ST. (FM STEREO)
While listening to FM stereo stations, press the [FM ST.]
button and notice “ ” appears in the display to
activate the “ STEREO ” listening. If the received FM
broadcast signal is too weak, it is recommendable to turn
off the stereo function by pressing the [FM ST.] button
again with “ ” disappears.
Note: The stereo function will not be activated if the FM
station is not stereo broadcasting.
Repeat pressing the [AM BW] button to select your desired
6, 4, 3, 2, 1 kHz bandwidth.
Wide band: It has better audio fidelity when receiving
strong signals or local stations.
Narrow band: It is suitable to receive weak & long distant
stations as narrow band is able to limit the interference
from adjacent strong signal and reduce background noise.
AM BW (BANDWIDTH)
SETTING FM FREQUENCY RANGE: In radio off mode,
press & hold the [FM SET] button until 87.5-108MHz, 64-
108MHz, 76-108MHz, or 87-108MHz appears in the
display. Quickly keep pressing on the [FM SET] button to
select a suitable frequency range for your local FM.
SETTING MW(AM) TUNING STEP: With radio off, press &
hold [9/10kHz] button until "9kHz" or "10kHz" appears on
the display to select your desired AM tuning step.
SYSTEM SETTING
To Next Page
Loading...
