Tecsun PL-505 - Delete Memory; Delete a Single Memory Manually; Semi-Auto Delete Memory; Delete All Memories Manually

PL-50512
DELETE MEMORY
Rotate the [TUNING] knob to
select the memory that you want to
delete, press & hold the [DELETE]
button until “ ” flashing; then
immediately press the [DELETE]
button to remove the unwanted
memory address.
Press and hold the [VM] button until
“ PRESET “ flashing to auto browse
those stored stations, press the
[DELETE] button at anytime to
direct delete the unwanted station;
the radio will keep on auto browsing
the next available station until you
press any other button to stop this
function.
Delete memory
Delete a single station
flashing
Press the [VM] button followed by “Memory address”
flashing on the upper right corner of the display to enter the
[Memory] mode. You can follow either of the below
methods to delete those unwanted stations:
1. DELETE A SINGLE MEMORY MANUALLY
2. SEMI-AUTO DELETE MEMORY
Press & hold the [DELETE] button
for 3 seconds and notices “ ”
appears on the upper right corner
of the display, then press the
[DELETE] button to delete all
memory within the selected band.
flashing
Delete all memories
3. DELETE ALL MEMORIES MANUALLY