Tecsun PL-505 - Specifications

24 PL-505
QUESTIONS ANSWERS SOLUTIONS
-Did not set the
proper radio station
for the alarm.
-Or there is no
broadcasting at
that radio station.
-Or you are in an
area where there is
no radio station for
your preset
frequency.
This may be caused
by interference, and
the computer
microchip does not
function properly.
When the alarm
is activated
(alarm by radio),
there is only
noise with the
broadcast.
Radio
malfunction.
-Preset your alarm
station properly
(see the above
setting).
-Make sure there is
a radio broadcast
in your location.
Remove the battery,
then re-install them.
If it is still not able to
work, please contact
your nearest dealer
for customer service.
www.tecsunradio.com hch@cantonmade.com