With radio off, install 2 x UM3 (AA) rechargeable batteries
& then press & hold the [ ] key until “ ” and
“ ” displaying to activate the built-in charging function.
Use the 5V external adaptor with USB plug to connect with
the radio. The symbol “ ” will advance from the bottom
to top during power charging. It stops when all batteries are
fully charged.
Notes:
1. Insist to use up all power of the rechargeable batteries
before charging again. This could extend the life time of
the battery and keep it in good conditions.
2. Two batteries should be used as a group and do not
apply them for other usage. Also do not mix the batteries
with different power capacity.
3. Do not charge any non-rechargeable batteries in the
radio, this will cause a hazard or damage to your radio.
PL-505
20
INTELLIGENT CHARGING FUNCTION
Connect 5V external adaptor with USB plug
DC-IN 5V
FM/SW ANT.
To Next Page
Loading...
