Teka CML 45 - Page 100

100
English
BUILT-IN INSTALLATION
Verify the minimum measurements required for
correct installation of the appliance.
The coffee maker must be installed in a column and
the column must be firmly fixed to the wall with
commercially available brackets.
Important:
• Important:allinstallationormaintenanceopera-
tions must be performed with the appliance dis-
connected from the mains electricity supply.
• Kitchenfurnitureindirectcontactwiththeappli-
ance must be heat resistant (65°C min).
• Toguaranteecorrectventilation,leaveagapat
the bottom of the cabinet (see measurements in
figure).