English
101
Position the rails on the sides of the cabinet as
shown in the figure.
Fix with the screws, then extract completely. If the
coffee maker is installed over a warmer drawer (500 W
max.), use the top surface of this as a reference to
position the rails.
In this case, there will be no surface to rest the
rails on.
Fix the power cable with the clip to avoid it tangling
when the appliance is inserted or extracted.
The power cable must be long enough to allow the
appliance to be extracted from the cabinet to fill the
coffee beans container.
The appliance must be earthed in compliance
with legislation.
Electrical connections must be performed by
a qualified electrician in compliance with the
manufacturer’s instructions and legislation in
force in the country of installation.
The electrical socket must be accessible.
Position the appliance on the rails, making sure the
pins are correctly inserted in the housings, then fix it
with the screws supplied.
If necessary, correct alignment of the appliance by
positioning the spacers supplied under or at the
sides of the support.
ca. 350 mm
To Next Page
Loading...
