Teka Mistral Plus - Technical Specifications

All electrical construction units carry the CE characteristic for low-voltage and/or EMV.
For the grounding of the Mistral a potential equalisation (Ø > 1.5 mm²) of all leading components is installed.
The Mistral is implemented according to the type of protection IP 54.
All connections of the control and the gas-prominent hoses are clearly characterised. Electrical connection
diagrams with associated parts lists are to be found in the appendix.
3.6. Technical data
3.6.1. Mistral and Mistral Eco
Filtering device: Mistral and Mistral ECO
Housing: Breadth 365 mm
Width 1089 mm
Dept 681 mm
Surrounding: Surrounding temperature, perm.+ 5 °C bis + 35 °C
Relative air humidity max. 65 %
Data
Mistral 230: Maximum air flow 280 m
3
/h
Power of the motor 1,1 kW
Connection voltage 230 V / 50/60 Hz
Maximum negative pressure 14.000 Pa
Mistral Eco 230: Maximum air flow 330 m
3
/h
Power of the motor 1,2 kW
Connection voltage 230 V / 50/60 Hz
Maximum negative pressure 14.000 Pa
Mistral 110: Maximum air flow 280 m
3
/h
Power of the motor 1,2 kW
Connection voltage 110 V / 50/60 Hz
Maximum negative pressure 21.000 Pa
Mistral Eco 110: Maximum air flow 330 m
3
/h
Power of the motor 1,2 kW
Connection voltage 110 V / 50/60 Hz
Maximum negative pressure 14.000 Pa
Filter material
Filter-unit:
Activated carbon:
Pre-filter mat for activated carbon:
Filter classification F 9
13,5 kg
Filter classification G4