8.2. Operating conditions
Depending upon kind and range of the maintenance the Mistral must be stopped and/or switched completely
dead.
For execution of cleaning and repair the Mistral is to be separated in principle from mains supply.
Warning!
High voltage! Causes death or lethal injuries.
With cleaning and maintenance work disconnect the Mistral from the power supply.
8.3. Care and visual inspection
Task of the operating personnel is it to check the accessible ranges of the Mistral daily for contamination and
damages. Contamination should, so far accessible, be removed and damages announced to the responsible
maintenance personnel.
Reference!
By unavoidable dirt deposits the inscription of control elements or warning references can become illegible.
Thus it can come to faulty operations, which can cause damages.
● Always control the Mistral at the beginning of work.
● Remove dust and other impurity from all control elements, announcements and warning sticker
once a week by wiping off with a damp cloth.
With the selection of the cleaning agent it is to be made certain that no surfaces, keyboards, plastics or seals
are attacked.
All aqueous industrial cleaner are usable without restriction.
Operating Instructions Mistral (Plus), Mistral Eco (Plus), Mistral Super Plus 110 and 230V vers. 4.10 Page 31 of 47
To Next Page
Loading...