Teka Mistral Plus - Service and Warranty Information; Instruction and Training Topics

Spare parts must correspond to the technical requirements specified by the manufacturing firm. This is
always ensured with original spare parts.
Use trained or instructed personnel only. Specify the competencies of the personnel for serving, controlling
and repairing clearly!
The maintenance of the Mistral may take place only via particularly trained personnel of the Trotec
Produktions- u. Vertriebs GmbH and/or a service company authorised in addition.
1.3. Service and warranty
The Trotec Produktions - Vertriebs GmbH is endeavoured to work on your questions and order as fast as
possible. We ask you to indicate your names as acknowledging address as well as the identifications data of
your Mistral before each inquiry. They are registered behind the first page of this operating instructions.
The warranty of the manufacturing firm for the Mistral extends within the implied warranty period to damage,
which can be proved on construction – to lead back material or production defects.
The time of warranty is 24 month, exception: turbine with brushes: 6 month. It begins with the delivery e.g.
start-up time of the Mistral.
A warranty is transferred only in its entirety if:
– the distribution inspection, the delivery and the instructions are implemented correctly,
– the Mistral is for intended use only,
– the maintenance and servicing instructions are to be strictly obeyed (With dirty turbine no warranty
claim exists).
In the case of a warranty the manufacturing firm transfers the material- and repair costs, which result directly
from the remedy at the Mistral.
Only the spare part prices and the fee of the manufacturing firm are valid.
We refer to the regulations as well as the general trading conditions of the Trotec Produktions- u. Vertriebs
GmbH.
1.4. Instruction- and training course topics
As operator of the Mistral you are obligated to inform and/or to instruct the operating/maintenance staff about
existing rules for the prevention of accidents and on the rights as well as about existing safety devices to and
around the Mistral. Different technical qualifications of the personnel are to be considered.
The operating/maintenance staff must have understood the instruction and it must be guaranteed that the
instruction is considered.
Only in such a way you can achieve security and the danger-conscious working of your staff. Each co-worker
should confirm the participation in the training course and instruction in writing.
On the following pages you will find examples of instruction topics, for copying as well a list for the
confirmation.
Operating Instructions Mistral (Plus), Mistral Eco (Plus), Mistral Super Plus 110 and 230V vers. 4.10 Page 6 of 47