5.2. Connecting the Mistral 22
6. Operation of the Mistral 22
6.1. Qualification of the operating personnel 22
6.2. Operating conditions 22
6.3. Operation 23
6.4. Program 24
6.4.1. Keypad 24
6.4.2. Display 24
6.4.3. Turn the Mistral ON / OFF 25
6.4.4. Turning-speed control 25
6.4.5. Volume-flow control 25
6.4.6. Operating message 25
6.4.7. Collective error message “filter full” 25
6.4.8. Collective error message “change coal“ 26
6.4.9. Collective error message „change brushes“ 26
6.5. Indicating and adjusting the system-parameter 26
6.6. Remote Control 27
6.7. Test operation 28
7. Filter pollution 29
7.1. Pre-filter 29
7.2. Filter unit 29
7.3. Activated carbon 29
8. Maintenance 30
8.1. General information 30
8.2. Operating conditions 31
8.3. Care and visual inspection 31
8.3.1. Visual inspections 32
8.4. Service 32
8.4.1. General information 32
8.4.2. Exchange of the filter-unit 32
8.4.3. Exchange of the activated carbon 34
8.4.4. Exchange of the brushes 36
9. Error tracing and break down search 37
10. Disposal 39
10.1. Environmental protection 39
10.2. Filter and types of filter dust 39
10.3. Final putting out of operation 39
To Next Page
Loading...