Options and Accessories
Option 1R
When the oscilloscope is ordered with Option 1R, it is shipped in
a configuration that permits easy installation into virtually any 19-
inch-wide electronic equipment rack. All hardware is supplied for
mounting the instrument into the main frame.
Complete rack-mounting instructions are provided in a separate
document. These instructions also contain the procedures for
converting a standard instrument into the Option 1R configuration
by using the separately orderable rack-mounting conversion kit.
Option 23
Two P6062B1X-10X Selectable-attenuation Probes are provided
in place of the standard P610310X Probes.
Power Cords
Instruments are shipped with the detachable power cord and
fuse configuration ordered by the customer. Table 6-1 identifies
the Tektronix part numbers for international power cords and
associated fuses. Additional information about power-cord
options is contained in Section 1, P re p a ra tio n fo r U se.
Table 6-1
Power Cords and Fuses
Description
Part Number
Standard (United States)
Power Cord, 2.5 m
161-0104-00
Fuse, 1.0 A, 250 V,
3AG, Va" x 1 'A " Slow
159-0019-00
Option A1 (Europe)
Power Cord, 2.5 m
161-0104-06
Fuse, 0.5 A, 250 V,
3AG, V*" x 1 Yu" Slow
159-0032-00
Option A2 (United
Kingdom)
Pbwer Cord, 2.5 m 161-0104-07
Fuse, 0.5 A, 250 V,
3AG, W 'xT/CSIow
159-0032-00
6-2
2225 Operators
To Next Page
Loading...
Need help?
General
