Tektronix DSA8200 Series

Commands Listed in Alphabetical Order
Examples
COMPENSATE:TE
MPERATURE:CH1?
might return
COMPENSATE:TEMPERATURE:CH1 1.5.
COMPensate:TEMPerature:MAInframe? (Query Only)
This query only command returns the difference (in °C) between the current
temperature of the mainframe a n d the associated temperature currently residing in
thein-userun-timecompensation memory.
Group
Compensation
Syntax
COMPensate:TEMPerature:MAI nframe?
Examples
COMPENSATE:TEMPERATURE:MAI NFRAME? might return
COMPENSATE:TEMPERATURE:MAI NFRAME 2.7.
CURSor?
This is a query only command that returns all of the current cursor settings.
Group
Cursor
Syntax
CURSor?
Examples
CURSOR? might return CURSOR:CURSOR1:COLOR 5; SOURCE CH3,MAIN;
CURSOR:CURSOR2:COLOR 5; SOURCE CH3,MAIN; CURSOR:DIV2
0;FUNCTION WAVEFORMS; SELECT CURSOR1; HBARS:DELTA
-0.401084010840; POSITION1 0.201897018970;POSITION2
-0.199186991870; CURSOR:VBARS:DELTA 19.9398797595E-009;
POSITION1 31.1302605210E-009; POSITION2 51.0701402806E-009;
CURSOR:WAVEFORM:HDELTA 0.485961914062; VDELTA
-19.9398797595E-009; HPOS1 0.240936279297; HPOS2
-0.245025634766; POSITION1 31.1302605210E-009; POSITION2
51.0701402806E-009
as the current cursor settings.
CURSor:CURSor<x>:COLOR
This command sets or queries the color of the cursor specified by x, which can be
1 or 2. (This command is the same as the DISplay:COLor:CURSOR command.)
DSA/CSA/TDS8X00/B Series Programmer Manual 2-99