Commands Listed in Alphabetical Order
Syntax
DISplay:COLor
:MASK <NR1 >
DISplay:COLor:MASK?
Related Commands
MASK:COLOr
Arguments
NR1 is an integer in the range of 0 through15representingacolorasdeļ¬ned
in the above table.
Examples
DISPLAY:COLOR:MASK 4 sets the color of the mask to fuchsia.
DISPLAY:COLOR:MASK? might return DISPLAY:COLOR:MASK 10, indicating
that the color of the mask is green.
DISplay:CURSReadout
This command sets or queries state of the Cursors readout. This is equivalent to
toggling the Cursor readout off or on with the Cursor readout icon in the toolbar.
Group
Display Control
Syntax
DISplay:CURSReadout { ON | O FF | NR1 }
DISplay:CURSReadout?
Arguments
ON enables the readout display for the Cursor function.
OFF disables the readout display for the Cursor function.
NR1 set to 0 disables the Cursor readout display; any other integer enables
the Cursor readout display.
Examples
DISPLAY:CURSREADOUT 1 enables the Cursor readout display.
DISPLAY:CURSREADOUT? might return DISPLAY:CURSREADOUT 0, indicating
that the Cursor readout display is off.
NOTE. A query always returns a 0 or 1.
DISplay:DATe
This command sets or queries state of the Date/Time display. This is equivalent to
toggling the Date/Time display on or off from the View menu.
DSA/CSA/TDS8X00/B Series Programmer Manual 2-123
To Next Page
Loading...
Need help?
General
