Commands Listed in Alphabetical Order
MASK:AUTOSET:
MODE?
might return MASK:AUTOSET:MODE AUTO, indicating
that mask autoset will run automatically when the user selects a standard mask
from the front panel.
MASK:COLOr
This command sets or queries the color of the mask. (The command is the same
as the DISplay:COLor:MASK command.) This is equivalent to setting Color in
the Option
s section of the Mask Setup dialog box. The available colors are listed
in the following table.
Group
Mask
Syntax
MASK:COLOr <NR1>
MASK:COLOr?
Related Commands
DISplay:COLor:MASK
DSA/CSA/TDS8X00/B Series Programmer Manual 2-199
To Next Page
Loading...
Need help?
General
