Commands Listed in Alphabetical Order
Arguments
ON enables the r
eadout d isplay for the Mask function.
OFF disables the readout display for the Mask function.
NR1 set to 0 disables the Mask readout display; any other integer enables the
Mask readout display.
Examples
DISPLAY:MASKREADOUT 1 enables the Mask readout display.
DISPLAY:MASKREADOUT? might return DISPLAY:MASKREADOUT 0, indicating
that the Mask readout display is off.
NOTE. A query always returns a 0 or 1.
DISplay:MEASBar
This comma nd sets or queries whether or not the Measurement Bar is displayed.
This is equivalent to checking or clearing the Measurement Bar menu item in the
View menu.
Group
Display Control
Syntax
DISplay:MEASBar { ON | OFF | NR1 }
DISplay:MEASBar?
Arguments
ON enables the Measurement Bar display.
OFF disables the Measurement Bar display.
NR1 set to 0 disables the Measurement Bar display; any other integer enables
the M easurement Bar displa y.
Examples
DISPLAY:MEASBAR 1 enables the Measurement Bar display.
DISPLAY:MEASBAR? might return DISPLAY :MEASBAR 0, indicating that the
Measurement Bar display is off.
NOTE. A query always returns a 0 or 1.
2-128 DSA/CSA/TDS8X00/B Series Programmer Manual
To Next Page
Loading...
Need help?
General
