Commands Listed in Alphabetical Order
Group
Horizontal
Syntax
HORizontal:MAGnify<x>:TOLP oint?
Examples
HORIZONTAL:MAG2:TOLPOINT? might return HORIZONTAL:MAG2:TOLPOINT
10.0000000000E–3
, indicating that the time interval between the trigger point
and the last point in the Mag2 timebase record is 100 µs.
HORizontal:MAGnify<x>:VIEW
This command sets or queries whether the specified Mag timebase i s displayed.
The
Mag timebase is specified by x, which can be 1 or 2. Sending this command
is equivalent to clicking the Mag1 or Mag2 icon located below the graticule area
of the display or pressing equivalent buttons on the front panel.
Group
Horizontal
S
yntax
HORizontal:MAGnify<x>:VIEW { ON | OFF | NR1 }
HORizontal:MAGnify<x>:VIEW ?
DSA/CSA/TDS8X00/B Series Programmer Manual 2-171
To Next Page
Loading...
Need help?
General
