Commands Listed in Alphabetical Order
that the horizo
ntal position of the Math 8 waveform using the Main timebase is
set to the minimum time of 19 ns.
HORizontal:MATH<x>:MAIn:RECordlength? (Query Only)
This query only command returns the record length of the Main timebase for the
specified math waveform. The math waveform is specified by x, which can be
1 through 8.
Record lengths can be 20, 50, 100, 250, 500, 1000, 2000, and 4000 samples. It
results from n ormalizing the sources of a math waveform.
Group
Horizontal
Syntax
HORizontal:MATH<x>:MAIn:RE Cordlength?
Related Commands
HORizontal:MATH<x>:MAIn:SCAle?, HORizontal:MATH<x>:MAIn:
RESolution?
Examples
HORIZONTAL:MATH4:MAIN:RECO RDLENGTH? might return
HORIZONTAL:MATH4:MAIN:RECO RDLENGTH 1000, indicating that
the record length for the Main timebase is set to 1000 samples for the Math
4 waveform.
HORizontal:MATH<x>:MAIn:REFPoint? (Query Only)
This query only command returns the horizontal reference point of the specified
math waveform using the Main timebase. The math waveform is specified by x,
which can be 1 through 8. The horizontal reference point is the horizontal position
around which the HORizontal:MAIn:SCAle command contracts or expands the
waveform, which affects the acquired and observable horizontal window of data.
The horizontal reference position is set as a f
raction of the record; 0.5 (50% of the
record) i s the default.
Group
Horizontal
Syntax
HORizontal:MATH<x>:MAIn:RE FPoint?
Related Commands
HORizontal:MATH<x>:MAIn:SCAle?
DSA/CSA/TDS8X00/B Series Programmer Manual 2-183
To Next Page
Loading...
Need help?
General
