Commands Listed in Alphabetical Order
Examples
HORIZONTAL:MA
TH3:MAIN:REFPOINT?
might return
HORIZONTAL:MATH3:MAIN:REF POINT .50000000000, indicating that the
horizontal reference point for the Math 3 waveform using the Main timebase
is set to 0.5 (50%).
HORizontal:MATH<x>:MAIn:RESolution? (Query Only)
This query only command re turns the current resolution per sample of the Main
timebase f
or the s pecified math waveform. The math waveform is specified by x,
which can be 1 through 8. Resolution is displayed in horizontal units, typically
time.
Group
Horizontal
Syntax
HORizontal:MATH<x>:MAIn:R ESolution?
Related Commands
HORizontal:MATH<x>:MAIn:SCAle?, HORizontal:MATH<x>:MAIn:
RECordlength?
Examples
HORIZONTAL:MATH2:MAIN:RES OLUTION? might return
HORIZONTAL:MATH1:MAIN:RES OLUTION 1.00000000000E–00 9,
indicating that the Main timebase resolution is at 1 ns for the Math2 waveform.
HORizontal:MATH<x>:MAIn:SCAle? (Query Only)
This query only command returns the scale (time per division) of the Main
timebase for the s pecified math waveform. The math waveform is specified by
x, which can be 1 through 8.
Group
Horizontal
Syntax
HORizontal:MATH<x>:MAIn:S CAle?
Related Commands
HORizontal:MATH<x>:MAIn:RECordlength?, HORizontal:MATH<x>:MAIn:
RESolution?
Examples
HORIZONTAL:MATH4:MAIN:SCA LE? might return
HORIZONTAL:MATH1:MAIN:SCA LE 1.00000000000E–009, indicating that the
Main timebase for the Math4 waveform is set to 1 ns per division.
2-184 DSA/CSA/TDS8X00/B Series Programmer Manual
To Next Page
Loading...
Need help?
General
