Tektronix DSA8200 Series

Commands Listed in Alphabetical Order
HORizontal:M
ATH<x>:MAIn:TOFPoint? (Query Only)
This query only command returns the time of first point of the Main timebase
record, which is the time interval between the trigger point and the first point in
the record, f
or the specified math waveform. The math waveform is specified by
x, which can be 1 through 8.
Group
Horizontal
Syntax
HORizontal:MATH<x>:MAIn:TO FPoint?
Related Commands
HORizontal:MATH<x>:MAIn:POSition?, HORizontal:MATH<x>:MAIn:
REFPoint?, HORizontal:MATH<x>:MAIn:SCAle?
Examples
HORIZONTAL:MATH3:MAIN:TOFP OINT? might return
HORIZONTAL:MATH3:MAIN:TOFP OINT 1.00000000000E–12, indicating that
the time of first point for t he Main timebase record for the Math3 waveform
is 100 ps.
HORizontal:MATH<x>:MAIn:TOLPoint? (Query Only)
This query only command returns the time of last point of the Main timebase
record, which is the time interval between the trigger point and the last point in
the record, for the specified math waveform. The math waveform is specified by
x, which can be 1 through 8.
Group
Horizontal
Syntax
HORizontal:MATH<x>:MAIn:TO LPoint?
Related Commands
HORizontal:MATH<x>:MAIn:POSition?, HORizontal:MATH<x>:MAIn:
REFPoint?, HORizontal:MATH<x>:MAIn:SCAle?
Examples
HORIZONTAL:MATH3:MAIN:TOLP OINT? might return
HORIZONTAL:MATH3:MAIN:TOLP OINT 36.0000000000E–009, indicating that
the time of last point for the Main timebase record for the Math3 waveform is
36 ns.
DSA/CSA/TDS8X00/B Series Programmer Manual 2-185