Commands Listed in Alphabetical Order
HORizontal:R
EF<x>:MAGnify<x>:POSition? (Query Only)
This query only command returns the horizontal position of the specified Mag
timebase for the specified Reference waveform. The Reference wave form is
specified by x
, which can be 1 through 8; the Mag timebase is specified by x,
which can be 1 or 2.
Group
Horizontal
Syntax
HORizontal:REF<x>:MAGnify <x>:POSition?
Related Commands
HORizontal:REF<x>:MAGnify<x>:TOFPoint?, HORizontal:REF<x>:
MAGnify<x>:TOLPoint?
Examples
HORIZONTAL:REF1:MAG2:POSI TION? might return
HORIZONTAL:REF1:MAGNIFY2: POSITION 19.00000000000E– 009,
indicating that the horizontal position for the Ref 1 waveform using the MAG2
timebase is the minimum time of 19 ns.
HORizontal:REF<x>:MAGnify<x>:RECordlength? (Query Only)
This query only command returns the record length of the Reference waveform
specified by x, which can be 1 through 8, using the specified Mag timebase (1 or
2). The value of the record length can be 20, 50, 100, 250, 500, 1000, 2000,
and 4000 samples.
Group
Horizontal
Syntax
HORizontal:REF<x>:MAGnify <x>:RECordlength?
Related Commands
HORizontal:REF<x>:MAGnify<x>:SCAle?, HORizontal:REF<x>:
MAGnify<x>:RESolution?
Examples
HORIZONTAL:REF5:MAG2:RECO RDLENGTH? might return
HORIZONTAL:REF5:MAG2:RECO RDLENGTH 1000, indicating that the
record length of the Ref 5 waveform using the Mag 2 timebase is 1000 samples.
2-186 DSA/CSA/TDS8X00/B Series Programmer Manual
To Next Page
Loading...
Need help?
General
