Commands Listed in Alphabetical Order
HORizontal:R
EF<x>:MAGnify<x>:RESolution? (Query Only)
This query only command returns the current resolution per sample of the
Reference waveform. The Reference waveform is specified by x, which can be 1
through 8; th
e Mag timebase is specified by x, which can be 1 or 2. Resolution is
displayed in horizontal units, typically time.
Group
Horizontal
Syntax
HORizontal:REF<x>:MAGnify< x>:RESolution?
Related Commands
HORizontal:REF<x>:MAGnify<x>:SCAle?, HORizontal:REF<x>:
MAGnify<x>:RECordlength?
Examples
HORIZONTAL:REF1:MAG1:RESOL UTION? might return
HORIZONTAL:REF1:MAGNIFY1:R ESOLUTION 12.50000000000E –012,
indicating that the resolution of the Ref 1 waveform using the Mag1 timebase is
12.5 ps.
HORizontal:REF<x>:MAGnify<x>:SCAle? (Query Only)
This query only command returns the scale (time per division) of the specified
Reference waveform using the specified Mag timebase. The Reference waveform
is specified by x, which can be 1 through 8; the Mag timebase is specified by
x,whichcanbe1or2.
Group
Horizontal
Syntax
HORizontal:REF<x>:MAGnify< x>:SCAle?
Related Commands
HORizontal:REF<x>:MAGnify<x>:RECordlength?, HORizontal:REF<x>:
MAGnify<x>:RESolution?
Examples
HORIZONTAL:REF3:MAG2:SCALE ? might return
HORIZONTAL:REF3:MAGNIFY2:S CALE 1.00000000000E–012, indicating that
the Mag2 timebase is 100 ps per division for the Ref 3 waveform.
DSA/CSA/TDS8X00/B Series Programmer Manual 2-187
To Next Page
Loading...
