Commands Listed in Alphabetical Order
HORizontal:R
EF<x>:MAGnify<x>:TOFPoint? (Query Only)
This query only command returns time of first point of the s pecified Reference
waveform using the specified Mag timebase. The Reference waveform is specified
by x, which ca
nbe1through8;theMagtimebaseisspecified by x, which can be
1 or 2. The time of first point is the time interval between the trigger point and the
first point in the specified Mag timebase record (waveform).
Group
Horizontal
Syntax
HORizontal:REF<x>:MAGnify <x>:TOFPoint?
Related Commands
HORizontal:REF<x>:MAGnify<x>:POSition?, HORizontal:REF<x>:
MAGnify<x>:SCAle?
Examples
HORIZONTAL:REF1:MAG1:TOFP OINT? might return
HORIZONTAL:REF1:MAGNIFY1: TOFPOINT 50.0000000000E-0 09, indicating
that the time interval between the trigger point and the first point in the Ref 1
waveform record using the Mag1 timebase is 50 ns.
HORizontal:REF<x>:MAGnify<x>:TOLPoint? (Query Only)
This query only command returns time of last point of the specified Reference
waveform using the specified Mag timebase. The Reference waveform is specified
by x, which can be 1 through 8; the Mag timebase is specified by x, which can be
1 or 2. The time of last point is the time interval between the trigger point and the
last point in the specified Mag timebase record (waveform).
Group
Horizontal
Syntax
HORizontal:REF<x>:MAGnify <x>:TOLPoint?
Related Commands
HORizontal:REF<x>:MAGnify<x>:POSition?, HORizontal:REF<x>:
MAGnify<x>:SCAle?
Examples
HORIZONTAL:REF1:MAG1:TOLP OINT? might return
HORIZONTAL:REF1:MAGNIFY1: TOLPOINT 500.00000000000E –12,
indicating that the time of last point of the Ref 1 waveform record using the
Mag 1 timebase is 500 ps.
2-188 DSA/CSA/TDS8X00/B Series Programmer Manual
To Next Page
Loading...
Need help?
General
