Commands Listed in Alphabetical Order
HORizontal:R
EF<x>:MAIn:POSition? (Query Only)
This query only command returns the horizontal position of the specified reference
waveform using the Main timebase. The re ference waveform is specified by
x, which can b
e 1 through 8.
Group
Horizontal
Syntax
HORizontal:REF<x>:MAIn:POS ition?
Related Commands
HORizontal:REF<x>:MAIn:REFPoint?, HORizontal:REF<x>:MAIn:TOFPoint?,
HORizontal:REF<x>:MAIn:TOLPoint?
Examples
HORIZONTAL:REF5:MAIN:POSIT ION? might return
HORIZONTAL:REF5:MAIN:POSIT ION 51.3630000000E–009, indicating that
the horizontal position of the Reference 5 waveform using the Main timebase is
51.36 ns.
HORizontal:REF<x>:MAIn:RECordlength? (Query Only)
This query only c ommand returns the record length of the specified reference
waveform using the Main timebase. The re ference waveform is specified by
x, which can be 1 through 8.
Group
Horizontal
Syntax
HORizontal:REF<x>:MAIn:REC ordlength?
Related Commands
HORizontal:REF<x>:MAIn:RESolution?, HORizontal:REF<x>:MAIn:SCAle?
Examples
HORIZONTAL:REF7:MAIN:RECOR DLENGTH? might return
HORIZONTAL:REF7:MAIN:RECOR DLENGTH 1000, indicating that the
record length of the Reference 7 waveform using the Main timebase is
1000 samples.
DSA/CSA/TDS8X00/B Series Programmer Manual 2-189
To Next Page
Loading...
Need help?
General
