Commands Listed in Alphabetical Order
indicating tha
t the time interval between the trigger point and the first point in the
Math 4 waveform record using the Mag1 timebase is 50 ns.
HORizontal:MATH<x>:MAGnify<x>:TOLPoint? (Query Only)
This query only command returns time of last point of the specified math
waveform using the specified Mag timebase. The math waveform is specified by
x, which can be 1 through 8; the Mag timebase is specified by x, which can be 1
or 2. The ti
me of last point is the time interval between the trigger point and the
last point in the specified Mag timebase record (waveform).
Group
Horizontal
Syntax
HORizontal:MATH<x>:MAGnif y<x>:TOLPoint?
Related Commands
HORizontal:MATH<x>:MAGnify<x>:POSition?, HORizontal:MATH<x>:
MAGnify<x>:SCAle?
Examples
HORIZONTAL:MATH2:MAG2:TOL POINT? might return
HORIZONTAL:MAGNIFY2:TOLPO INT 1.00000000000E–9, indicating that the
time interval between the trigger point and the last point in the Math 2 waveform
record using the Mag2 timebase is 1 ns.
HORizontal:MATH<x>:MAIn:POSition? (Query Only)
This query only command returns the horizontal position of the specified math
waveform using the Main timebase . The math waveform is specified by x, which
can be 1 through 8.
Group
Horizontal
Syntax
HORizontal:MATH<x>:MAIn:P OSition?
Related Commands
HORizontal:MATH<x>:MAIn:REFPoint?, HORizontal:MATH<x>:MAIn:
TOFPoint?, HORizontal:MATH<x>:MAIn:TOLPoint?
Examples
HORIZONTAL:MATH8:MAIN:POS ITION? might return
HORIZONTAL:MATH8:MAIN:POS ITION 19.00000000000E–009, indicating
2-182 DSA/CSA/TDS8X00/B Series Programmer Manual
To Next Page
Loading...
Need help?
General
