Commands Listed in Alphabetical Order
HORizontal:M
ATH<x>:MAGnify<x>:SCAle? (Query Only)
This query only command returns the scale (time per division) of the specified
Mag timebase for the s pecified math waveform. The math waveform is specified
by x, which ca
n be 1 through 8 ; the Mag timebase is specified by x, which can
be 1 or 2.
Math wavefo
rms derive their timebase settings from the waveform sources
that define them. Math scale is inherited from the live channel source of the
math waveform or the saved reference waveforms, if there are no live channel
waveforms in the math expression.
Group
Horizontal
Syntax
HORizontal:MATH<x>:MAGnify <x>:SCAle?
Related Commands
HORizontal:MAGnify<x>:RECordlength, HORizontal:MAGnify<x>:
RESolution?
Examples
HORIZONTAL:MATH2:MAG2:SCAL E? might return
HORIZONTAL:MATH1:MAGNIFY1: SCALE 30.00000000000E–009, indicating
that the Mag1 timebase is currently set to 30 ns per division for the Math 1
waveform.
HORizontal:MATH<x>:MAGnify<x>:TOFPoint? (Query Only)
This query only command returns the time of first point of the specified math
waveform using the specified Mag timebase. The math waveform is specified by
x, which can be 1 through 8; the Mag timebas e is specified by x, which can be 1
or2.Thetimeoffirst point is the time interval between the trigger point and the
first p oint in the specified Mag timebase record (waveform).
Group
Horizontal
Syntax
HORizontal:MATH<x>:MAGnify <x>:TOFPoint?
Related Commands
HORizontal:MATH<x>:MAGnify<x>:POSition?, HORizontal:MATH<x>:
MAGnify<x>:SCAle?
Examples
HORIZONTAL:MATH4:MAG1:TOFP OINT? might return
HORIZONTAL:MATH4:MAGNIFY1: TOFPOINT 50.00000000000E– 009,
DSA/CSA/TDS8X00/B Series Programmer Manual 2-181
To Next Page
Loading...
Need help?
General
