Commands Listed in Alphabetical Order
Examples
SYSTEM:PROPER
TIES:CH1:BANDWIDTH?
might
return
SYSTEM:PROPERTIES:CH1:BANDW IDTH
2.00000000000E+010,1.2499 9997440E+010
, indicating that the available
bandwidths for C hannel 1 are 20 GHz and 12.5 GHz.
SYSTEM:PROPERTIES:CH5:BAN DWIDTH? might return
SYSTEM:PROPERTIES:CH5:BAN DWIDTH 5.00000000000E+010,
indicating that the characteristic bandwidth of the sampling module is 50 GHz.
SYSTem:PROPerties:CH<x>:CAPacitance? (Query Only)
This quer
yonlycommandreturnsthecharacteristic load capacitance (if
applicable) of the channel specified by x, which can be 1 through 8.
Group
System
Syntax
SYSTe
m:PROPerties:CH<x>:CAPacita nce?
Examples
SYSTEM:PROPERTIES:CH3:CAP ACITANCE? might return
SYSTEM:PROPERTIES:CH3:CAP ACITANCE 4.75000000000E–0 13,
indicating that the characteristic load capacitance for Channel 3 is 0.475 pF.
SYSTem:PROPerties:CH<x>:CLKRec? (Query Only)
This query only command returns a list of the available clock recovery selections
available to the trigger system from the channel specified by x, which can be
1 through 8.
Group
System
Syntax
SYSTem:PROPerties:CH<x>:C LKRec?
Related Commands
TRIGger:CH<x>:CLKRec:LIST?, TRIGger:CH<x>:CLKRec:VALue,
TRIGger:CLKRec:SOUrce
Examples
SYSTEM:PROPERTIES:CH1:CLK REC? might return
SYSTEM:PROPERTIES:CH1:CLK REC NONE,OC12,OC48.
2-282 DSA/CSA/TDS8X00/B Series Programmer Manual
To Next Page
Loading...
