Tektronix DSA8200 Series User Manual

Commands Listed in Alphabetical Order
Group
System
Synta
x
SYSTem:PROPerties:CH<x>:P RObe:SCAle?
Examples
SYSTEM:PROPERTIES:CH3:PRO BE:SCALE? might return
SYSTEM:PROPERTIES:CH3:PRO BE SCALE 1.0 0000000000E-001,
indicating that the probe attached to Channel 3 has a probe characteristic scale
factor of 0.1 (that is, a 10X attenuation from input to output).
SYSTem:PROPerties:CH<x>:PRObe:SERialnum? (Query Only)
This query only command returns the serial number of the probe attached to
the specified channel.
Group
System
Syntax
SYSTem:PROPerties:CH<x>:P RObe:SERialnum?
Examples
SYSTEM:PROPERTIES:CH3:PRO BE:SERIALNUM? might return
SYSTEM:PROPERTIES:CH3:PRO BE:SERIALNUM "B012288".
SYSTem:PROPerties:CH<x>:PSYNc:CLKRAnge? (Query Only)
This query returns the guaranteed clock range of the PatternSync Trigger module
corresponding to CH<x>, where <x> is the first channel associated with the
compartment in which the PatternSync Trigger module is installed. Use the odd
numbered channel associated with the compartment. For example, if the module
is installed in the CH7/CH8 compartment, use 7 for x.
Group
System
Syntax
SYSTem:PROPerties:CH<x>:P SYNc:CLKRAnge?
Examples
SYSTEM:PROPERTIES:CH1:PSY NC:CLKRANGE? might return
SYSTEM:PROPERTIES:CH1:PSY NC:CLKRANGE "150.OMHZ-12. 75GHZ" for
an 80A06 PatternSync module installed in the C1C2 small-module compartment.
2-288 DSA/CSA/TDS8X00/B Series Programmer Manual

Tektronix DSA8200 Series Specifications

General

Brand	Tektronix
Model	DSA8200 Series
Category	Test Equipment
Language	English