Commands Listed in Alphabetical Order
Syntax
TIMe <Q String>
TIMe?
Related Commands
DATE
Arguments
QSTRING is time in the form "hh:mm:ss".
hh is the hour number from 1 to 24.
mm is the minute n umber in the hour from 0 to 59.
ss is the seconds number in the minute from 0 to 59.
NOTE. There must be a colo
n after the hh and after the mm.
Examples
TIME "0 1:24:00" sets the time to 01:24 AM.
TIME? might return TIME 14:30:00, indicating that the time is 2:30 PM.
TRIGger? (Query Only)
This query only command returns all the trigger parameters for the instrument.
Group
Trigger
Syntax
TRIGger?
Examples
TRIGGER? might return TRIG:GATE 0;HIF 0;HO LD
5.00000000000E-6;INTR 200.000000000 00E+3;LEV
0.0000;MOD NORM;SLO RI S;SOU CLKREC;STATE
TRIGGERED;CLKR:SOU CH1;:TRIG:CH1:CL KR:VAL USE;USE
9.80000000000E+9;:TRIG:CH2 :CLKR:VAL NON;USE 0.0000
.
TRIGger:AUTOSync (No Query Form)
This command executes the AutoSync operations. Any pattern sync trigger
parameter that has its AutoSync option enabled will synchronize with the
currently selected waveform. The command supports both the *OPC and *OPC?
Operation Complete capabilities.
Group
Trigger
DSA/CSA/TDS8X00/B Series Programmer Manual 2-301
To Next Page
Loading...
Need help?
General
