Commands Listed in Alphabetical Order
Syntax
TRIGger:CLKRe
c:CRC:DATARate?
Examples
TRIGGER:CLKREC:CRC:DATARA TE? might return
:TRIGGER:CLKREC:CRC:DATAR ATE 12.05000000000E+9, indicating that
the measured data rate is 12.05 GHz.
NOTE. NAN is returned if a Clock Recovery instrument is not present.
TRIGger:CLKRec:CRC:DELETESTandard (No Query Form)
This command deletes the named standard from the connected Clock Recovery
instrument, including any factory-supplied s tandard.
If a factory installed standard is deleted by mistake, it c an be recreated using the
TRIGger:CLKRec:CRC:CREATESTandard command.
Group
Trigger
Syntax
TRIGger:CLKRec:CRC:DELETE STandard <Qstring>
Related Commands
TRIGger:CLKRec:CRC:CREATESTandard
Arguments
QString is a quoted string defines filename of the standard to delete from the
Clock Recovery instrument. The filename is case sensitive.
Examples
TRIGGER:CLKREC:CRC:DELETE STANDARD "USER_10G" deletes the standard
named USER_10G from the Clock Recovery instrument.
TRIGger:CLKRec:CRC:DEVICEName
This command sets or queries the device name of the connected Clock Recovery
instrument. The n
ame is saved in non-volatile memory on the Clock Recovery
instrument.
Group
Trigger
Syntax
TRIGger:CLKRec:CRC:DEVICE Name <Qstring>
2-312 DSA/CSA/TDS8X00/B Series Programmer Manual
To Next Page
Loading...
Need help?
General
