Tektronix DSA8200 Series User Manual

Commands Listed in Alphabetical Order
Syntax
TRIGger:CLKRe
c:CRC:PHASEERRP2P?
Examples
TRIGGER:CLKREC:CRC:PHASEE RRP2P? might return
:TRIGGER:CLKREC:CRC:PHASE ERRP2P 100.00000000000, indicating that
the peak-to-peak phase error is 100%.
NOTE. NAN is returned if a Clock Recovery instrument is not present.
TRIGger:CLKRec:CRC:PHASEERRRMS? (Query Only)
This query only command returns the phase error RMS measurement (in percent
unit intervals) from the connected Clock Recovery instrument.
Group
Trigger
Syntax
TRIGger:CLKRec:CRC:PHASEE RRRMS?
Examples
TRIGGER:CLKREC:CRC:PHASEE RRRMS? might return
:TRIGGER:CLKREC:CRC:PHASE ERRRMS 22.55348205566, indicating that the
RMS phase error is 22.55%.
NOTE. NAN is returned if a Clock Recovery instrument is not present.
TRIGger:CLKRec:CRC:RCONfigdevice (No Query Form)
This command restores the connected Clock Recovery instrument to the settings
from one of the non-volatile setup locations in the Clock Recovery instrument.
Group
Trigger
Syntax
TRIGger:CLKRec:CRC:RCONfi gdevice {POWER_ON | SETUP_1 |
SETUP_2 | SETUP_3 | SETUP_4 | FACTORY}
Related Commands
TRIGger:CLKRec:CRC:SCONfigdevice
2-322 DSA/CSA/TDS8X00/B Series Programmer Manual

Tektronix DSA8200 Series Specifications

General

Brand	Tektronix
Model	DSA8200 Series
Category	Test Equipment
Language	English