Tektronix DSA8200 Series User Manual

Commands Listed in Alphabetical Order
Related Commands
TRIGger:CLKRe
c:CRC:RELock
Examples
TRIGGER:CLKREC:CRC:RESETL OCKCOUNT resets the lock count back to zero on
the connected Clock Recovery instrument.
TRIGger:CLKRec:CRC:SCONfigdevice (No Query Form)
This command saves the current settings of the connected Clock Recovery
instrument to one of the non-volatile setup locations in the Clock Recovery
instrument.
Group
Trigger
Syntax
TRIGger:CLKRec:CRC:SCONfi gdevice {POWER_ON | SETUP_1 |
SETUP_2 | SETUP_3 | SETUP_4}
Related Commands
TRIGger:CLKRec:CRC:RCONfigdevice
Arguments
POWER_ON is the configuration used a t power on.
SETUP_1 is memory location 1.
SETUP_2 is memory location 2.
SETUP_3 is memory location 3.
SETUP_4 is memory location 4.
Examples
TRIGGER:CLKREC:CRC:SCONFI GDEVICE SETUP_1 stores the current Clock
Recovery instrument settings to memory location 1.
TRIGger:CLKRec:CRC:SERIalnum? (Query Only)
This query only command returns the serial number of the connected Clock
Recovery Instrument.
Group
Trigger
Syntax
TRIGger:CLKRec:CRC:SERIal num?
2-324 DSA/CSA/TDS8X00/B Series Programmer Manual

Tektronix DSA8200 Series Specifications

General

Brand	Tektronix
Model	DSA8200 Series
Category	Test Equipment
Language	English