Tektronix DSA8200 Series User Manual

Commands Listed in Alphabetical Order
Arguments
RISe causes the
instrument to trigger on the rising slope of the trigger source
signal.
FALL causes th
e instrument to trigger on the falling slope of the trigger source
signal.
Examples
TRIGGER:SL
OPE FALL
causes the instrument to trigger on the falling slope of
the trigger source signal when the trigger source is set to External Direct.
TRIGGER:S
LOPE?
might return TRIGGER:SLOPE RISE, indicating that the
instrument is set to trigger on the rising slope of the trigger source signal.
TRIGger:SOUrce
This command sets or queries the trigger source, which provides the signal that
triggers acquisition. This is equivalent to selecting one of the radio buttons in the
Trigger Source section of the Trigger Setup dialog box.
2-340 DSA/CSA/TDS8X00/B Series Programmer Manual

Tektronix DSA8200 Series Specifications

General

Brand	Tektronix
Model	DSA8200 Series
Category	Test Equipment
Language	English