Tektronix DSA8200 Series User Manual

Status and Events
Table 3-5: Execution Error Messages (EXE Bit 4) (cont.)
Code Message
2246
Saveref error, Selected channel data invalid
2248
This ref cannot be activated
2249
Reference deletion error, Waveform in use
2301
Cursor error, Off-screen
2303
Cursor error, Cursor source waveform is off
2304
Cursor error, Cursors are off
2321
Histogram warning, histogram turned off
2400 Not enough memory available
2401 This channel cannot be activated
2402
Math/Meas/Histo have circular definition
2410 Empty math string
2411
Syntax error in math string
2412
Semantic error in math string
2413 Math expression is too complex
2420
Histogram cannot be performed on this type of waveform
2425
Mask counting cannot be performed on this type of waveform
2430
WfmDB cannot be built on this type of waveform
2431
No Waveform Database resource available
2435
Selected Channel is not a TDR capable channel
2440
State Change – Reject Conditional Stop Action
2441
Selected Condition is Not Active
2450
Internal Clk Invalid with FrameScan active
2451
Envelope Mode Invalid with FrameScan active
2455 RTL Hardware Warning
2456
RTL Software Error – severe problem
2457
RTL Software Warning
2458 Diagnostic Error
2459
Compensation Error
2500 Mask error – Mask Margin Boundary violated
2501
TDR coerced off – TDR operation not allowed with probe attached
2502
Waveform Database Source in use
2503
Clock R ecovery not available
2504 Record length incompatible with scale
2505
Autoset Execute Warning – No waveforms enabled
2506
Error s aving waveform to file
2507
FrameScan and Average Complete incompatible
2508
Selected filter is not available
DSA/CSA/TDS8X00/B Series Programmer Manual 3-15

Tektronix DSA8200 Series Specifications

General

Brand	Tektronix
Model	DSA8200 Series
Category	Test Equipment
Language	English