Commands Listed in Alphabetical Order
AUTOSet:VERT
ical
This command sets or queries w he t her an autoset should perform the v ertical
autoset portion when Autoset is executed.
Group
Vertical
Syntax
AUTOSet:VERTical{ON|OFF|0|1}
AUTOSet:VERTical?
Related Commands
AUTOSet
Arguments
ON enables the vertical AutoSet options.
OFF disables the vertical AutoSet options.
0 disables the vertical AutoSet options.
1 enables the vertical AutoSet options.
Examples
AUTOSET:VERTICAL ON
This command enables the vertical autoset options.
AUTOSET:VERTICAL? might return AUTOSET:VERTICAL 0, indicating that
vertical autoset options are disabled.
BUSY? (Query Only)
This is a query only command that returns the status of the instrument. This
command allows you to synchronize the operation of the instrument with your
application program. See Synchronization Methods for more detailed information.
Group
Status and Error
Syntax
BUSY?
Related Commands
*OPC, *WAI
DSA/CSA/TDS8X00/B Series Programmer Manual 2-71