Commands Listed in Alphabetical Order
NOTE. This comm
and is for service personnel only. Refer to the calibration
procedures in the Service Manual.
Group
Calibration
Syntax
CAL
ibrate:UPDATEinfo:ALL
Examples
CALIBRATE:UPDATEINFO:ALL updates the nonvolatile memories of the
mainframe and all resident module channels with the latest calibration information.
CALibrate:UPDATEinfo:CH<x> (No Query Form)
This command (no query form) updates the calibration information in the
nonvolatile memory of the sampling modu
le. This includes the current date and
time, temperature, and host information (such as current channel, location, model
number, and serial number).
NOTE. This command is for service personnel only. Refer to the calibration
procedures in the Service Manual.
Group
Calibration
Syntax
CALibrate:UPDATEinfo:CH<x >
Examples
CALIBRATE:UPDATEINFO:CH1 updates the nonvolatile memory of the module
occupying channel 1 with the latest calibration information.
CALibrate:UPDATEinfo:MAInframe (No Query Form)
This command (no query form) updates the calibration information in the
nonvolatile memory of the mainframe. This includes the current date, time, and
temperature.
NOTE. This command is for service personnel only. Refer to the calibration
procedures in the Service Manual.
Group
Calibration
2-76 DSA/CSA/TDS8X00/B Series Programmer Manual
To Next Page
Loading...
Need help?
General
