Tektronix MDO3000 Series Program Manual

Commands Listed in Alphabetical Order
Examples
ACTONEVENT:AC
TION:EMAIL:SETUP:TOADDRESS
“george.wilcox@tektronix.com”
sets the recipient’s email address to
george.wilcox@tektronix.com.
ACTONEVent:
ACTION:EMAIL:STATE
Sends an email when a specified event occurs, or queries the state of the “send
email” action. The default state is 0 (off).
To specify an email address for the recipient, use the command
ACTONEVent:ACTION:EMAIL:SETUp:TOADDRess
To specify an event, use the command ACTONEVent:EVENTTYPe.
Group
Act on Event
Syntax
ACTONEVent:ACTION:EMAIL:STATE <0|1|OFF|ON>
ACTONEVent:ACTION:EMAIL:STATE?
Arguments
1, ON sends an email when the specified event occurs.
0, OFF turns off this action.
Examples
ACTONEVENT:ACTION:EMAIL:STATE ON specifies to send an email when the
specified event occurs.
ACTONEVent:ACTION:PRINT:STATE
Sends a screen image to a printer when a specified event occurs, or queries the
state of the “
send screen image” action. The default state is 0 (off).
To specify an event, use the command ACTONEVent:EVENTTYPe.
Group
Act on Event
Syntax
ACTONEVent:ACTION:PRINT:STATE <0|1|OFF|ON>
ACTONEVent:ACTION:PRINT:STATE?
Arguments
1, ON sends a screen image to the printer when the specified event occurs.
0, OFF turns off this action.
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-119

Tektronix MDO3000 Series Specifications

General

Brand	Tektronix
Model	MDO3000 Series
Category	Test Equipment
Language	English