Commands Listed in Alphabetical Order
Examples
ACTONEVENT:AC
TION:PRINT:STATE ON
specifies to send a screen image to the
printer when the specified event occurs.
ACTONEVent:ACTION:SAVEIMAGE:STATE
Saves a screen image to file when a specified event occurs, or queries the stateof
the“savescreenimagetoafile”action. Thedefaultstateis0(off).
To specify an event, use the command ACTONEVent:EVENTTYPe.
Group
Act on Event
Syntax
ACTONEVent:ACTION:SAVEIMAGE:STATE <0|1|OFF|ON>
ACTONEVent:ACTION:SAVEIMAGE:STATE?
Arguments
1, ON saves a screen image to a file when the specified event occurs.
0, OFF turns off this action.
Examples
ACTONEVENT:ACTION:SAVEIMAGE:STATE ON specifies to save a screen image
to a file when the specified event occurs.
ACTONEVent:ACTION:SAVEWFM:STATE
Saves the currently selected waveform data to a file when a specified event occurs,
or queries the state of the “save waveform to file” action. The default state is 0
(off).
To specify an event, use the command ACTONEVent:EVENTTYPe.
Group
Act on Event
Syntax
ACTONEVent:ACTION:SAVEWFM:STATE <0|1|OFF|ON>
ACTONEVent:ACTION:SAVEWFM:STATE?
Arguments
1, ON saves the waveform to a file when the specified event occurs.
0, OFF turns off this action.
Examples
ACTONEVENT:ACTION:SAVEWFM:STATE O N specifies to save a waveform to a
file when the specified event occurs.
2-120 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual