Tektronix MDO3000 Series Program Manual

Commands Listed in Alphabetical Order
Syntax
BUS:B<x>:AUDi
o:CHANnel:SIZe <NR1>
BUS:B<x>:AUDio:CHANnel:SIZe?
Arguments
<NR1> specifies the number of bits per channel.
Examples
BUS:B1:AUDIO:CHANNEL:SIZE 8 sets the number of bits per channel to 8.
BUS:B1:AUDIO:CHANNEL:SIZE? might return
:BUS:B1:AUDIO:CHANNEL:SIZe 24 indicating that the number of bits per
channel is 24.
BUS:B<x>:AUDio:CLOCk:POLarity
Specifies the clock polarity for the AUDIO bus.
Conditions
This command requires the DPO4AUDIO application module for the
MDO4000/B/C series, or the MDO3AUDIO for MDO3000 series.
Group
Bus
Syntax
BUS:B<x>:AUDio:CLOCk:POLarity {FALL|RISe}
BUS:B<x>:AUDio:CLOCk:POLarity?
Arguments
FALL sets falling edge as the clock polarity.
RISe sets rising edge as the clock polarity.
Examples
BUS:B1:AUDIO:CLOCK:POLARITY Fall sets the clock polarity to Fall.
BUS:B1:AUDIO:CLOCK:POLARITY? might return
:BUS:B1:AUDIO:CLOCK:POLARITY RISe indicating that the clock polarity
is set to Rise.
BUS:B<x>:AUDio:CLOCk:SOUrce
Specifies the clock source waveform for the AUDIO bus.
Conditions
This command requires the DPO4AUDIO application module for the
MDO4000/B/C series, or the MDO3AUDIO for MDO3000 series.
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-161

Tektronix MDO3000 Series Specifications

General

Brand	Tektronix
Model	MDO3000 Series
Category	Test Equipment
Language	English