Tektronix MDO3000 Series Program Manual

Commands Listed in Alphabetical Order
Group
Configuration
Synta
x
CONFIGuration:ANALOg:GNDCPLG?
Related Commands
(See page 2-91, Vertical Command Group.)
Returns
0
CONFIGuration:ANALOg:MAXBANDWidth? (Query Only)
This query returns the maximum bandwidth for analog channels.
Group
Configuration
Syntax
CONFIGuration:ANALOg:MAXBANDWidth?
Related Commands
(See page 2-29, Horizontal Command Group.)
Returns
<NR3>, which is a floating point number that represents the maximum bandwidth,
in hertz, for the analog channels.
CONFIGuration:ANALOg:MAXSAMPLERate? (Query Only)
This query returns the maximum sample rate for analog channels.
Group
Configuration
Syntax
CONFIGuration:ANALOg:MAXSAMPLERate?
Related Commands
(See page 2-29, Horizontal Command Group.)
Returns
<NR3>, which is a floating point number that represents the maximum sample
rate, in samples per second, for the analog channels.
2-238 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual

Tektronix MDO3000 Series Specifications

General

Brand	Tektronix
Model	MDO3000 Series
Category	Test Equipment
Language	English