Tektronix MDO3000 Series Program Manual

Commands Listed in Alphabetical Order
CONFIGuratio
n:ANALOg:NUMCHANnels? (Query Only)
This query returns the number of analog channels.
Group
Configuration
Syntax
CONFIGuration:ANALOg:NUMCHANnels?
Returns
<NR1>
CONFIGuration:ANALOg:RECLENS? (Query Only)
This query returns a comma-separated list of supported record lengths for the
analog channels.
Group
Configuration
Syntax
CONFIGuration:ANALOg:RECLENS?
Related Commands
(See page 2-29, Horizontal Command Group.)
Returns
List of <NR1> values.
CONFIGuration:ANALOg:VERTINVert? (Query Only)
This query returns a boolean value to indicate whether the vertical invert feature
for analog channels is present.
Group
Configuration
Syntax
CONFIGuration:ANALOg:VERTINVert?
Related Commands
(See page 2-91, Vertical Command Group.)
Returns
<NR1> = 1 if the vertical invert feature is present.
<NR1> = 0 if the vertical invert feature is not present.
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-239

Tektronix MDO3000 Series Specifications

General

Brand	Tektronix
Model	MDO3000 Series
Category	Test Equipment
Language	English