Commands Listed in Alphabetical Order
CONFIGuratio
n:DIGITAl:NUMCHANnels? (Query Only)
This query returns the number of digital channels.
Group
Configuration
Syntax
C
ONFIGuration:DIGITAl:NUMCHANnels?
Returns
<NR1>
CONFIGuration:DVM? (Query Only)
Indicates whether the Digital Voltmeter hardware is present, and the DVM feature
is enabled.
Group
Configuration
Syntax
CONFIGuration:DVM?
Returns
1 indicates that the Digital Voltmeter hardware is present and the DMV feature is
enabled.
0 indicates that either the digital volt meter hardware is not present, or thefeature
is not enabled.
Examples
CONFIG:DVM? might return 1, indicating that the hardware is present and the
featureisenabled.
CONFIGuration:EXTVIDEO? (Query Only)
This query returns a boolean value to indicate whether the extended video trigger
features are present.
Conditions
This feature requires installation of a DPO4VID application module for allexcept
the MDO3000 and MDO4000C series.
Group
Configuration
2-252 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual
To Next Page
Loading...
Need help?
General
