Tektronix MDO3000 Series Program Manual

Commands Listed in Alphabetical Order
(See page 2-76, Tr
igger Command Group.)
(See page 2-61, Search Command Group.)
Returns
<NR1> = 1 if the high-speed USB bus feature is present.
<NR1> = 0 if the high-speed USB bus feature is not present.
CONFIGuration:DIGITAl:MAGnivu? (Query Only)
This query returns a boolean value to indicate whether the instrument supports
the MagniVu feature for digital channels. If there are no digital channels,the
value returned is 0.
Group
Configuration
Syntax
CONFIGuration:DIGITAl:MAGnivu?
Related Commands
(See page 2-29, Horizontal Command Group.)
Returns
<NR1> = 1 if MagniVu is present.
<NR1> = 0 if MagniVu is not present.
CONFIGuration:DIGITAl:MAXSAMPLERate? (Query Only)
This query returns the maximum sample rate for digital channels, in samplesper
second. If there are no digital channels, the value returned is 0.
Group
Configuration
Syntax
CONFIGuration:DIGITAl:MAXSAMPLERate?
Related Commands
(See page 2-29, Horizontal Command Group.)
Returns
<NR3>, which is a floating point number.
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-251

Tektronix MDO3000 Series Specifications

General

Brand	Tektronix
Model	MDO3000 Series
Category	Test Equipment
Language	English