Commands Listed in Alphabetical Order
Examples
ETHERnet:NETW
ORKCONFig MANual
specifies to configure the Ethernet
settings manually.
ETHERnet:NET
WORKCONFig?
might return AUTOMATIC, indicating the
settings are being configured automatically.
ETHERnet:PASSWord
This command specifies the HTTP Ethernet access password. If a password is
set, the user must enter the password before the user's Web browser can access
the oscilloscope.
Group
Ethernet
Syntax
ETHERnet:PASSWord <new>
ETHERnet:PASSWord?
Related Commands
ETHERnet:LXI:LAN:PASSWord:ENABle,
ETHERnet:LXI:LAN:PASSWord:ESCOPEENABle
Arguments
<new> is a new password, enclosed in quotes.
Examples
ETHERNET:PASSWORD ”ZEN53” replaces the current Ethernet password with the
new password ZEN53.
ETHERNET:PASSWORD? might return :ETHERNET:PASSWORD “ZEN53”.
ETHERnet:PING (No Query Form)
Causes the oscilloscope to ping the gateway IP address.
Group
Ethernet
Syntax
ETHERnet:PING EXECute
Examples
ETHERNET:PING EXECUTE causes the oscilloscope to ping the gateway IP
address.
2-314 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual
To Next Page
Loading...
Need help?
General
