Tektronix MDO3000 Series Program Manual

Commands Listed in Alphabetical Order
Related Commands
ETHERnet:LXI:
LAN:PASSWord:ESCOPEENABle, ETHERnet:PASSWord
Arguments
0, OFF — turns off the LXI password feature. This is the default.
1, ON — turns on the LXI password feature.
Examples
ETHERnet:L
XI:LAN:PASSWord:ENABle ON
turns on the LXI password
feature.
ETHERnet:LXI:LAN:PASSWord:ENABle? might return 1, indicating that this
feature is turned on.
ETHERnet:LXI:LAN:PASSWord:ESCOPEENABle
This command controls whether to use the LXI password for e*Scope (effectively
equal to enabling password protection for e*Scope). With e*Scope, you can
access any Internet-connected MDO4000/B/C, MSO/DPO4000B or MDO3000
Series Oscilloscope from a web browser.
Group
Miscellaneous
Syntax
ETHERnet:LXI:LAN:PASSWord:ESCOPEENABle {0|1|ON|OFF}
ETHERnet:LXI:LAN:PASSWord:ESCOPEENABle ?
Related Commands
ETHERnet:PASSWord,
ETHERnet:LXI:LAN:PASSWord:ENABle
Arguments
0, OFF turns off the LXI password feature for e*Scope. This is the default.
1, ON turns on the LXI password feature for e*Scope.
Examples
ETHERnet:LXI:LAN:PASSWord:ESCOPEENABle ON turns on the LXI
password feature for e*Scope.
ETHERnet:LXI:LAN:PASSWord:ESCOPEENABle ? might return 1, indicating
that this feature is turned on.
ETHERnet:LXI:LAN:RESET (No Query Form)
This command resets the LXI local area network. The items which this command
reset include: DHCP/BOOTP, mDNS and DNS-SD, e*Scope password protection,
LXI password protection, and e*Scope and LXI password.
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-311

Tektronix MDO3000 Series Specifications

General

Brand	Tektronix
Model	MDO3000 Series
Category	Test Equipment
Language	English