Commands Listed in Alphabetical Order
Syntax
FILESystem:MO
UNT:DRIve <Qstring>
Related Commands
FILESystem:MOUNT:LIST?,
FILESystem:UNMOUNT:DRIve
Arguments
Qstring is a semicolon separated list of fields described as follows:
Drive Name: The drive name to use, which should be a case insensitive single
letter followed by a colon. The drive name must be a letter between 'I' and 'Z',
inclusive. Drives A: through D: are not used and drives E: through H: are reserved
for the USB host ports.
Server Identity: One of:
- DNS name of the server.
- IP address of the server.
Path: The path to be mounted; e.g. /this/that/mydir
User Name: The user name.
User Password: The user password.
NOTE. "User Name" and "User Password" are optional and are only used for
mounts on Microsoft Windows networks.
Examples
FILESystem:MOUNT:DRIve
"I:;192.168.1.10;C$;mywindowsusername; mywindowspassword"
would mount the shared C: drive on the Windows server at IP address
192.168.1.10, using the Windows login name mywindowsusername and the
Windows password mywindowspassword.
FILESystem:MOUNT:LIST? (Query Only)
This query returns a comma-separated list of the mounted network drives,
including the drive letter, server identity (DNS name or IP address), mountpath
and type. If no network drives are mounted, an empty string is returned. Mount
types are either NFS or CIFS (for Microsoft Windows networks).
NOTE. There are no new lines or white spaces in the returned string.
Group
File System
2-324 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual
To Next Page
Loading...
Need help?
General
