Tektronix MDO3000 Series Program Manual

Commands Listed in Alphabetical Order
Aseriesofexam
ples showing how to use mask commands for typical tasks
is included in an appendix. (See page E-1, Mask/Limit Command Sequence
Examples.)
Conditions
This command requires a DPO4LMT application module for 4000 series models,
and an MDO3LMT application module for MDO3000 series models.
Group
Mask
Syntax
MASK:TESt:STATus?
Related Commands
MASK:TESt:STATE,
Returns
This query returns one of: OFF, DELAY, PASSING, FAILING, PASSED , or
FAILED,
When the violation count exceeds the violation threshold during the
test, the status changes from
PASSING to FAILING. When the test is complete,
it changes from
FAILING to FAILED.
Examples
MASK:TESt:STAT? might r
eturn PASSED indicating the test passed and is
complete.
MASK:TESt:STOP:FAILure
This command causes the instrument to stop acquiring data when a pass/fail mask
test fails.
A series of examples showing how to use mask commands for typical tasks
is included in an appendix. (See page E-1, Mask/Limit Command Sequence
Examples.)
Conditions
This command requires a DPO4LMT application module for 4000 series models,
and an MDO3LMT application module for MDO3000 series models.
Group
Mask
Syntax
MASK:TESt:STOP:FAILure {|ON|OFF|<NR1>}
MASK:TESt:STOP:FAILure?
Related Commands
MASK:TESt:STATE,
2-394 MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual

Tektronix MDO3000 Series Specifications

General

Brand	Tektronix
Model	MDO3000 Series
Category	Test Equipment
Language	English