Commands Listed in Alphabetical Order
Examples
MATH:? might re
turn
MATH: 2.0 E-4 indicating that the math horizontal scale
is 200 μ
MATH[1]:HORizontal:UNIts
Returns the math waveform horizontal measurement unit value.
Group
Math
Syntax
MATH[1]:HORizontal:UNIts?
Examples
MATH:HORIZONTAL:UNITS? might return MATH:HORIZONTAL:UNITS "?"
indicating that the math horizontal unit label for unknown values is the default
question mark unit.
MATH[1]:LABel
Sets or queries the waveform label for the math waveform.
Group
Math
Syntax
MATH[1]:LABel <QString>
MATH[1]:LABel?
Arguments
<QString> is the quoted string used as the label for the math waveform.
Examples
MATH:LABEL “Output” sets the label for the math waveform to Output.
MATH:LABEL? might return MATH:L ABEL "Sum of chann el 1 and
channel 2"
indicating the current label for the math waveform.
MATH[1]:SPECTral:MAG
This command specifies the units of the Spectral Magnification function in the
math string.
Group
Math
MDO4000/B/C, MSO/DPO4000B and MDO3000 Series Oscilloscopes Programmer Manual 2-415
To Next Page
Loading...
Need help?
General
